
January, 2005
Kinkead Ridge Vineyard Spray Program
This
is the sixth iteration of the Ohio version of a spray program developed over a
period of eight years in Oregon. The program has been changed to respond to the
generally higher disease pressure and multiplicity of disease types encountered
in Southern Ohio.
Every year is different in this business. Last summer was nearly optimum for
growth. Think high soybean yields. Vigor was excessive yet we were able to harvest relatively
clean fruit and had virtually no foliar disease. I did add one more late season
copper spray to the program for better control of fruit rot, but otherwise more
or less kept to schedule.
Phomopsis
pressure was light this year. Black rot pressure was moderate and black rot
was not a significant problem this year. Though pressure was high, downy and
powdery mildew were non-existent in the canopy. I continue to be impressed by
the performance of Elite versus black rot and powdery mildew.
I now
use Pristine rather than Abound for late season disease control. It's cheaper
and is actually registered for the control of hot climate rot precipitating
fungi as well as for most other diseases. Importantly, fungal resistance
development is less likely with Pristine.
Now, a few comments are in order: First, realize that this program addresses the
growing of vinifera, not hybrids, at my specific site. My site is planted at
moderate to high density (7-1/2 ft. rows) and shows low to moderate disease
pressure. If your site characteristics are similar and you achieve good spray
coverage, then your results should be satisfactory. You may note that I
reference an air blast sprayer in the program. While I realize that these are
not cheap, I know of no inexpensive way to get the coverage necessary to keep a
mature vinifera vineyard clean under adverse weather conditions in Southern
Ohio. Finally, good cultural practices such as shoot positioning and leaf
removal in the fruit zone greatly aid in disease control.
Insecticides are needed to control Grape Berry Moth (GBM)
and Japanese Beetle, as well as other pests. Scouting to identify target
populations is useful in order to determine spray timing. I use Malathion 5EC
tank mixed with the May 31st and June 16th fungicide sprays. I use Sevin
XLR Plus on August 7th for GBM and as required for Japanese beetles.
Neither of these products are restricted use.
2005 Spray Program Schedule
|
Approx. |
Spray |
Rate/ |
Cost/ |
Sprayer |
Spray |
|
May 5 |
Mix 1 |
40 gl. |
$11 |
hydraulic |
Even |
|
May 18 |
Mix 1 |
50 gl. |
$14 |
hydraulic |
Even |
|
May
31 |
Mix 2 |
50 gl. |
$23 |
airblast |
Even |
|
June 16 |
Mix 2 |
50 gl. |
$23 |
airblast |
Even |
|
July 3 |
Mix 4 |
55 gl. |
$24 |
airblast |
Even |
|
July 20 |
Mix 3 |
55 gl. |
$23 |
airblast |
Even |
|
Aug. 7 |
Mix 3 |
55 gl. |
$23 |
airblast |
Even |
|
Aug. 25 |
Mix 4 |
55 gl. |
$24 |
airblast |
Fruit zone |
|
Sept. 15 |
Mix 5 |
55 gl. |
$6 |
airblast |
Fruit zone weighted |
Total fungicide program cost $171/ac.
Note: Magnesium Sulfate has apparently solved my deficiency caused fruit rot problem and improved overall vine health and winter hardiness.
FORMULATIONS:
MIX 1: 6 lbs. Manzate 75 DF or Dithane, 8 lbs. Sulfur DF (micronized), 2 lbs. Solubor DF, 4 lbs. magnesium sulfate, & 12 oz. Nufilm P per 100 gallons solution.
MIX 2: 8 oz. Elite 45DF, 6 lbs. Manzate 75 DF or Dithane, 4 lbs. Sulfur DF, 6 lbs. magnesium sulfate, & 10 oz. Nufilm P per 100 gallons.
MIX 3. 8 oz. Elite 45DF, 6 lbs. Captan 50 WP, 8 lbs. magnesium sulfate & 8 oz. Nufilm P per 100 gallons.
MIX 4: 18 oz. Pristine & 8 lbs. magnesium sulfate per 100 gals.
MIX
5: 4 lbs. Kocide 2000 per 100 gallons.
NOTES:
NOTE 1: My rows are spaced 7-1/2 feet apart. Higher (or lower) density plantings may require adjustments to spray volumes (i.e. rates).
NOTE 2: Mixes 1 and 2 may burn shoot tips if temperatures soar into the 90s shortly after spraying. Mix 5 may burn leaf margins if heavy continuous rain occurs after spraying.
NOTE 3: The Solubor in Mix 1 raises the solution PH considerably, making Mix 1 incompatible with PH sensitive materials such as Captan, and Sevin.
NOTE 4: No Sulphur is sprayed after fruit-set and no Captan is applied within 45 days of harvest. This keeps fungicide residues from influencing fermentation.
NOTE 5: Potential micronutrient deficiencies of Magnesium, Boron (Solubor), Sulphur, Copper (Kocide), plus Zinc & Manganese (Manzate) are addressed by this program. Don't add Magnesium Sulfate unless you have a deficiency.
NOTE 6: Most insecticides are compatible with Mixes 2, 3, and 4. Check to be sure. Exception: Malathion 5EC is not compatible with Mix 3.
NOTE
7: Botrytis fruit rot is a low level but a growing problem here. In the event of a problem, newer fungicides such as Vangard WG or Elevate WDG
should provide some control.
NOTE 8: Micronized DF Sulfur apparently varies in quality. Kumulus is allegedly better than Microthiol which is better than Thiolux. All are vastly better than simple wettable sulfur.
Spot
Spraying Guide
Fungicidal:
#1 Rubigan EC at 2cc/gallon plus Manzate 75 DF or Dithane at 2/3 oz. (18 g.)/gallon.
Herbicidal:
Total
KILL.
#1: Roundup Weather Max at 1-1/2 oz./gallon.
#2:
Roundup Weather Max at 1 oz./gallon plus MCPA or 2-4-D Amine at
3/4 oz./gallon.
I
use this for most of my intra-row spot spraying.
Broadleaf only:
#1: MCPA or 2-4-D Amine at 1-1/2 oz./gallon plus surfactant at 2/3 oz./gallon.
Note: Vinifera is more tolerant of MCPA than it is of 2-4-D. The same is
unfortunately also true for blackberries and poison oak, among others. MCPA does
work well on thistles and field bindweed.
Ron
Barrett
Kinkead Ridge Vineyard
4288 Kinkead Road
Ripley, OH 45167
937-392-1178
www.KinkeadRidge.com